Endless Pools X2000 SwimCross Owner'S Manual Download

Page: 18 / 36

Page 15

AUDIO IN.STREAM 2 (OPTIONAL)

If your exercise system has the optional in.stream 2 Bluetooth

w/subwoofer system. The following screens and functions will be

available on the swim area control panel:

AUDIO

The swim side control panel is used with the in.stream 2 audio

system. The Audio screen in the Settings menu gives you the option to

disconnect your Bluetooth enabled

device, adjust the Fader, Balance

or Sub Woofer.
Use the or buttons to scroll

to desired option, press

(middle left) lit button to select the

function. Press the or

buttons to change parameters.

Press

(top left) lit button to take

you back to the main Settings menu.

IN.STREAM 2 FUNCTIONS

Press the

button in the home screen to access your audio system.

If you are using a device with Bluetooth technology, it must be connected

for functions to work.
Please note that the Play/Pause and Change Track functions apply to

devices using Bluetooth technology only, and will NOT work when AUX

is selected as the source.

Turning power on/off

Press the

(top right) lit button to start the audio on or off process.

Selecting the source

Press the

(top left) lit

button to select a source using

Bluetooth wireless technology

or AUX (aux is not available at

time of publication). Selection

will be indicated below In.

stream 2.

Pairing Bluetooth

Audio Power must be on. Go to the Bluetooth settings on your device

and find in.stream 2 and press to connect. Enter pin 5555 and press pair

to sync your device.

NOTE:

Only one device at a time can be synced.

Play/Pause audio

Press the Play/Pause

(middle right) lit button to start or pause the

audio. Press

(middle left) lit button to mute or enable sound.

Adjusting the volume

Press the or buttons to increase or decrease the volume

illustrated by the slider bar.

Changing tracks

Use the Last Track and Next Track

(lower left) lit button or

(lower right) lit button to change tracks.

TEMPERATURE CONTROL

The set temperature range is from 15°C to 40°C (59°F to 104°F). (The

water temperature of any exercise system may rise or lower slightly

depending on the current use and condition of your exercise system

and on outside temperatures.)
The set temperature of the swim side water will automatically be 29.5°C

(85°F) the first time power is applied. This is the setting programmed at

the factory. After the exercise system has been set up and used, the

last temperature value set by the user will be stored in memory. If power

is disconnected from the exercise system, it will automatically revert to

the last set temperature when power is reapplied.
To display the set temperature of the exercise system:
Press the or buttons on the control panel in the home screen.
To increase the set

temperature of the exercise

system:
Press the button in the

home screen. The set point

will appear in blue. After 3

seconds without any change

to the set temperature value,

the current water temperature

will reappear in white.
To decrease the set temperature of the exercise system:
Press the button in the home screen. The set point will appear in blue.

After 3 seconds without any change to the set temperature value, the

current water temperature will reappear in white.

JETS CONTROL

When pressed, the top two buttons on the left of the screen will activate the

jets when in the home screen. If left running the low or high speed pumps will

automatically turn off after 2 hours.

SWIM JETS - TOP 3 JETS

The

SWIMCROSS

Exercise System

uses a 2.5 Horsepower two speed

pump to power the top 3 swim jets.
Press jet button to activate the top