ENCARDIO RITE EDI-53P/L/I, User Manual

Page: 2 / 52

Users’ Manual EDI-53 Series Digital Indicator
www.encardio.com
Contents
1 INTRODUCTION 4
1.1 Known issues 4
2 FRONT PANEL AND CONTROLS 5
2.1 Display 5
2.2 Low Batt indicator 5
2.3 ON / OFF key 5
2.4 Keypad 5
2.5 Units selection 6
2.6 Battery charger connector 6
2.7 Sensor connector 6
2.8 Rechargeable battery 6
3 OPERATING PRINCIPLE 7
3.1 Transducers 7
3.2 Measurement of transducer output 7
3.3 Calculation of parameter value in engineering units. 8
3.4 Non-linearity correction using polynomial calculation 9
4 OPERATION 10
4.1 Charging the battery 10
4.2 Turning on the indicator 10
4.3 First time use 11
4.4 Starting and stopping the Real Time Clock 11
4.5 Clearing the Setup memory 12
4.6 Clearing the Data memory 12
4.7 Entering a number through the keyboard 13
4.8 Setting the date and time 13
4.9 Taking measurements 14
4.10 Displaying parameter value in engineering units 14
4.11 Storing a reading 15
4.12 Recalling stored readings 16
4.13 Printing the logged or setup data 17
4.14 Sending data to a computer 19
5 SETUP 22
5.1 Preparing Setup data 22
5.2 Entering Setup data 23
5.3 Erasing setup data for a single channel 24
5.4 Erasing setup data for all channels 25