8
Cables and Component Checklist
Components Supplied with the EHX System
1. EHX adaptor
2. EMSCAN’s patented scanner
3. RF SMA to type N coaxial cable
: It is referred as the RF cable in this manual. It connects
the scanner to the spectrum analyzer and has a SMA connector for the scanner and a
N connector for the spectrum analyzer 50 ohm input port. It transmits RF output of the
patented scanner to the spectrum analyzer.
4. Micro-D control cable
: It connects the adapter to the scanner to enable control of the
EMSCAN’s patented scanner’s switched probes and to power the scanner.
5. USB Cable
: It connects the PC (laptop or desktop) to the EHX adaptor. The USB Cable
provided with the system has ferrites on both ends of the cable
6. SMB-BNC Trigger Cable
: It connects EHX adaptor to the spectrum analyzer.
7. Surface wave absorber
: is only provided with the EMxpert EHX 8 GHz versions to test
above 6 GHz. (part numbers: 3000-1806 and 3000-1808)
8. EMxpert USB Drive
includes the EMxpert software installation program and User Manual.
Customer Provided Components
1. Spectrum Analyzer
: It must include the necessary options to work with the EMxpert EHX (see
Supported
Spectrum Analyzers
). It measures the radio frequency (RF) signal received from the EMSCAN’s
patented scanner, generated by the very-near-field emissions of an
adjacent activated PCB and it outputs the data to the PC.
2. PC (Laptop / Desktop)
: It must support a LAN 10/100 connection to the
spectrum analyzer and a USB connection (version 2.0 or higher) to the
adaptor or two USB connections, one for the spectrum analyzer and
one for the adaptor. It runs the EMxpert software and receives data,
which it can display and manipulate immediately or store for future data
presentation.
3. Ethernet or USB cable
: It connects PC (laptop or desktop) to the spectrum analyzer.
About EMxpert
Cables and Component Checklist
Note:
Spectrum Analyzer,
Personal Computer (PC)
connected with Ethernet
cable must comply CE
emission requirements
