14
Click on “Restart now”
In “Choose an option”, click on “Troubleshoot”
In “Troubleshoot”, click on “Advanced options”
In “Advanced options”, click on “Startup Settings”
In “Startup settings”, click on “Restart”
In “Startup settings”, press number 7 on your keyboard to select “Disable driver signature enforcement”
6. Open Keysight IO
Look at the bottom right of the Keysight IO window and see if it says PRIMARY VISA
If it does not, go to
Control Panel / Programs / Select Keysight IO / Change / Modify / Select
PRIMARY
[in Windows 7 or equivalent path for other Windows OS]
When using a FSH 4 or FHS 8 connected via USB to the PC, go to the install folder on the CD, hard
disk or key, open the folder USBDriverFSH8 and run the FSH4_V2_11.exe in order for the Keysight
IO library to recognize the FSH.
Keysight IO is good at auto-discovering and configuring. If it is connected properly you will see in
the bottom section Messages the following two lines:
Instruments are already discovered and configured
User interface session started
If there is a connection issue, mostly with LAN, select Manual Configuration and then LAN
Instrument
In Set LAN Address / Hostname or IP Address
Enter the IP address 172.16.1.148
In Verify Connection
Click on Test this VISA Address
Then click on Accept
If there is still no connection, disable your PC firewall or set it up to allow traffic to/from
172.16.1.148 and repeat the steps above.
If you are using a Keysight X series spectrum analyzer, please refer to Technical Bulletin #9
for additional help in connecting the analyzer.
7. Close Keysight IO
If you are using an Keysight X series spectrum analyzer, please
refer to Technical Bulletin #9 for specific settings before closing
Keysight IO.
Once connected, set the analyzer as a favorite. Click on the grey star and it will turn yellow.
8. Double click on the EMxpert5 icon
Look at the bottom left of the EMxpert application and wait until it shows “Connected to the
Scanner and Spectrum Analyzer”.
Get ready to scan!
If you have any issue, verify that you are using a compatible spectrum analyzer with the right hardware,
firmware and software version:
http://www.emscan.com/emxpert/EMx_supportedSA.cfm
If your EMxpert still does not work, contact us by email at
or
call +1-403-291-0313 ext. 2
About EMxpert
Quick Installation and Checklist
