37754-6-1019
Page 50
MULTIFUNCTION REMOTE OPERATING INSTRUCTIONS
During a prolonged power outage, the fireplace can operate in
Continuous Pilot mode. This reduces drain on the batteries used
to ignite the burner and ensures the fireplace will continue to
operate throughout the outage.
Continuous Pilot/Intermittent Pilot (CPI/IPI) Selection
With the system in OFF position press the Mode Button
Figure
67
to index to the CPI mode icon.
See Figures 90 and 91.
Pressing the Up Arrow Button will activate the CPI. Pressing the
Down Arrow Button will return to IPI. A single beep will confirm
the reception of the command.
OFF
Figure 90
OFF
Figure 91
Button Lock
This function will lock the Buttons to avoid unsupervised
operation.
To activate this function, press the MODE and UP Buttons at the
same time.
See Figure 92.
To deactivate this function, press the MODE and UP Buttons at
the same time.
OFF
Figure 92
Low Battery Power Detection - Transmitter
The life span of the remote control batteries depends on
various factors:
•
Quality of the batteries
•
How frequently the fireplace cycles on and off
When the transmitter batteries are low, an Icon will appear on the
LCD display of the transmitter.
See Figure 93
before all battery
power is lost. When the batteries are replaced this Icon will
disappear.
OFF
Figure 93
