![background image](http://html.mh-extra.com/html/empire-comfort-systems/boulevard-multifunction-remote-dvll48sp/boulevard-multifunction-remote-dvll48sp_installation-instructions-and-owners-manual_2404037022.webp)
37754-6-1019
Page 22
Figure 20
The fireplace includes a user interface wall box that must be
installed in a plastic outlet box (not provided). A low voltage orange
or blue box is recommended. Locate the user interface wall box
within ten feet from the right side of the fireplace. Before securing
the outlet box in place, make sure the wire harness for the user
interface and battery extension can reach the location without
causing strain on the harnesses.
See Figure 20.
Run the extension wiring to the user interface wall box and
connect the white connector to the remote receiver battery box.
Install the battery box into the wall outlet box, and then install the
white remote cover supplied with the provided screws.
ELECTRICAL CONNECTIONS (CONT’D)
WIRE GROMMET
USER INTERFACE HARNESS AND
BATTERY EXTENSION HARNESS
CONNECT TO THE USER INTERFACE/BATTERY
HOLDER. MUST BE INSTALLED IN A WALL
JUNCTION BOX (ORANGE LOW VOLTAGE OR
BLUE BOX RECOMMENDED)
NOTE: OUTER ACCESS PANEL AND JUNCTION BOX REMOVED.
REPLACE AFTER ALL WIRE AND GAS CONNECTIONS
HAVE BEEN MADE.