Emos RAP CT KARGO Bange Operation Manual Download Page 67 | Manualshive

Page: 67 / 88

Emos RAP CT KARGO Bange Operation Manual Download Page 67

66

Contingency processing

Note

◆

When pushing the vehicle, pay attention to the situation around. Do not
move forward or backward suddenly after the vehicle getting out of pit,
to avoid causing injury or damage to people or objects around.

Vehicle traction

◆

If traction is needed, it should be carried out by the corresponding RAP's

authorized service station or a professional trailer company.

◆

It is recommended to give priority to the platform trailer. If the wheel and
axle of are in good condition, the wheels lifting trailer can also be used to
tow the front of the vehicle.

◆

Platform trailer

» This is the best way for vehicle

traction

◆

Wheel lifting trailer

» When towing the vehicle from

the front of vehicle using
a wheel lifting trailer, it is
recommended to use a towing
trolley under the rear wheels.
If not use the towing trolley, it
needs to release the parking
brake.

«
...
65
66
67
68
69
...
»

Summary of Contents for RAP CT KARGO Bange

























































































Reviews:

No comments