manualshive.com logo in svg

Emos RAP CT KARGO Bange, Operation Manual, Page: 64 / 88

Share
Download
Emos RAP CT KARGO Bange Operation Manual Download Page 64

63

Emergency treatment

Important information

Note

 

◆

When parking and maintaining vehicle on public road, please bear it in 
mind that the red side of the warning triangle faces the driving direction 
of the vehicle and place in the position where is 50 to 150m away from 
rear of the vehicle to warn the vehicles behind so as to avoid danger. 
After the repair, please take back the warning triangle for the next use.

Reflective vest

 

◆

The reflective vest provided from 

the factory are placed in the seat 
storage box. If you need to get off 
during driving, especially at night, 
please wear the reflective vests 
before getting off so that the rear 
vehicles can find as soon as 
possible.

Note

 

◆

Please keep the reflective vests in the vehicle all the time. If the 

reflective vests are seriously damaged or defaced (which will affect the 
reflective effect), it is recommended that you replace the reflective vest 

in time.

Summary of Contents for RAP CT KARGO Bange

























































































Reviews:

No comments