54
Daily maintenance
Vehicle corrosion protection
Correct maintenance can prevent corrosion of vehicle.
The most common causes of vehicle corrosion are as follows:
◆
Saline - alkali, dust and moisture are accumulated in hard-to-reach areas
under the vehicle.
◆
Lacerate the paint layer or bottom layer due to slight collision or due to
stones and gravel.
To prevent vehicle corrosion, the following guidelines should be observed:
◆
Be diligent in washing the vehicle. Regular washing can keep the body
clean, but in order to prevent corrosion, the following points should be
observed:
» If you drive on saline-alkali road in winter or live by the sea, clean the
vehicle at least once a month to reduce corrosion.
» The high pressure water gun is very effective for cleaning the chassis
and wheel cover of vehicle. Since it is difficult to see all the mud and
dirt in those places, special attention should be paid. Only wetting mud
and debris and not removing them will cause greater harm to vehicle.
Do not allow dust to clog the drain holes of the frame, otherwise the
accumulated water in these parts will cause corrosion.
» After winter, clean the chassis thoroughly.
◆
Check the paint and decorations of vehicle.
» If any chips or cracks are found in the paint layer, they should be
repaired immediately to prevent corrosion.
◆
Check the interior.
» Moisture and dust tend to accumulate in the interior and cause
corrosion. Always check the interior to make sure it dry.
◆
When transporting chemicals, detergents, fertilizers, salts and other
items, use appropriate containers for transportation. If spills or leaks are
found, they must be cleaned immediately and kept dry.
