20
Instrumentation
side are extinguished simultaneously.
◆
Turn on the hazard warning light switch, all the turn signals and the turn
indicators flash at the same time; Turn off the hazard warning light switch,
all the turn signals and the turn indicators go out simultaneously.
High beam indicator
◆
Turn the ignition switch to the
“
ON
”
position to turn on the high beam,
and the high beam indicator lights up.
◆
Turn off the high beam and the high beam indicator is off.
Position light indicator
◆
The ignition switch is set to the
“
ON
”
position, the position light or low
beam is turned on, and the position light indicator lights up.
◆
Turn off the position light and low beam light and the position light is off.
Rear fog light indicator
◆
The ignition switch is placed in the
“
ON
”
position, the low beam or high
beam lights up, turn on the rear fog light, and the rear fog light indicator
is turned on.
◆
Turn off the rear fog light, and the rear fog light indicator goes out.
Low beam indicator
◆
Turn the ignition switch to the
“
ON
”
position, turn on the low beam,
and the low beam indicator will light.
◆
Turn off the low beam and the low beam indicator is off.
READY indicator
READY
◆
This indicator light reflects the vehicle starting state. When the ignition
switch is turned to the
“
ON
”
position and the gear position is in the
“
D
”
or
“
R
”
position, the indicator lights up, indicating that the vehicle
is ready, and the acceleration handle can be turned to drive.
Charging connection indicator
◆
The charging gun is connected to the charging port of the vehicle and the
charging connection indicator light is on.