manualshive.com logo in svg

Emos RAP CT KARGO Bange, Operation Manual, Page: 38 / 88

Share
Download
Emos RAP CT KARGO Bange Operation Manual Download Page 38

37

Operation guide

Driving aid

Note

 

◆

Reversing radar is used to assist the driver in parking and reversing, 
and cannot replace your personal judgment. Be sure to operate the 
vehicle on an observation basis and do not rely solely on the parking 
radar system.

 

◆

It is necessary to keep the outer surface of the reversing camera clean. 
If it is found that there is snow, water, frost, mud, dust, etc., it should be 
removed in time to avoid affecting the function.

Swing system

 

◆

The swing system can make the 
RAP intelligent vehicle reduce 
the turning radius when turning, 
reduce the risk of turnover when 
turning, keep balance when 
passing the rough road, improve 
the stability of the vehicle and 
improve the driving experience.

 

◆

Under normal conditions, the 
swing system control handle is locked. When this function is required, the 
swing system control handle can be pulled up to unlock.

Warning

 

◆

Please turn off the swing system when reversing.

Summary of Contents for RAP CT KARGO Bange

























































































Reviews:

No comments