35
Operation guide
Driving aid
reversing radar stops working.
Obstacle detection and alarm function
◆
When the obstacle approaches probe from the 150cm outward, the
reversing radar controller will alarm according to the distance of the
obstacle. The alarm mode is buzzer alarm, which is divided into the
following:
Obstacle distance from sensor (cm)
Buzzer frequency (Hz)
150~90
2
90~60
4
60~35
8
<35
Long alarming
Note
◆
The system will be affected by factors such as the physical
characteristics, the position of the object, angle, size, material or
environment, which may lead to a narrower detection range, no alarm
or false alarm.
◆
Reversing radar is used to assist the driver in parking and reversing,
and cannot replace your personal judgment. Be sure to operate the
vehicle on an observation basis and do not rely solely on the parking
radar system.
◆
It is necessary to keep the outer surface of the radar probe of the
reversing warning device clean. If it is found that there is snow, water,
frost, mud, dust, etc., it should be removed in time to avoid affecting the
function.