EMobility eClick, Installation Instructions Manual

Page: 49 / 540

49
Installation
The national standards apply.
A suitable earth electrode must be used.
The suitability of this earth electrode
must be measured to verify its compliance
with the national standards.
Assuming there is an earth electrode of
verified suitability:
single-phase connection: L1, N, PE,
three-phase connection: L1, L2, L3, N, PE.
An IT mains is not supported.
The eClick must not be connected directly
to an IT mains.
IT
L1
L2
L3
N
TT
L1
L2
L3
N
PE
eClick
LS
RCD
Danger
Use only power transmission
cables complying with DIN VDE
18015 and designed for voltages
Umax < 3 %
Note
A separate document describes
how the ePoleDuo is installed.
Caution
When multiple charging points
are to be installed, every tenth
must be provided with additional
earthing.
Caution
Installations in a TN-C, TT,
or IT mains must fulfil special
requirements.