emmeti EH0618DC, Installation And Use Manual

Page: 88 / 108

88
GB GB
Menù
label
Par Label
Descrizione
U.
m.
Range
Default C-TH
PW
Address
(Base 0)
min max
USYS
200

Room set point in cooling mode (Comfort temperature)
°C 15.0 30.0 24.0 X 16412
201

Attenuation value on the room Set point in cooling mode
°C 1.0 10.0 6.0 X 16414
202

Room set point in heating mode (Comfort temperature)
°C 5.0 30.0 20.0 X 16413
203

Attenuation value on the room Set point in heating mode
°C 1.0 10.0 4.0 X 16415
204

Comfort / Attenuation conditions change:
On: Change Comfort / attenuation manually forced
Off: Mainteining the Comfort / Attenuation condition
- Off On Off X 16416
205

Beginning of the comfort conditions period:
Time of day when the transition to Comfort conditions is forced
h:
min
00:00

00:00 X 16465
206

End of period Comfort conditions:
Time of day when the transition to attenuation conditions is forced
h:
min

23:59 23:59 X 16466
207 
Differential on the room temperature set point
Differential on the set temperature, in heating / cooling mode, with
which the heat pump is started
°C 1.0 5.0 1.0 S 16417
208

Active environment set point °C Read Value 8983
209 
Voltage output status "Room Termostat" (clamps C-D):
On: Ambient temperature not satisfied: 230 V between terminals C-N
Off: Satisfied room temperature 230 V between terminals D-N
- Read Value 8985
210

Winter climatic curve, minimum external environment temperature set °C -20.0 5.0 -5.0 S 16418
211

Winter climatic curve, minimum external environment temperature set °C 10.0 40.0 20.0 S 16429
212  Winter climatic curve, minimum external environment temperature set °C 10.0 60.0 22.0 S 16420
213

Winter climatic curve, minimum external environment temperature set °C 20.0 60.0 45.0 S 16421
214

Factory parameter, do not change - - - 0 S 16422
215

Winter climatic curve (fan coil), minimum water outlet temperature set
(active when remote contact "Set point 2" closed)
°C 20.0 60.0 45.0 S 16423
216

Winter climatic curve (fan coil), maximum water outlet temperature set
(active when remote contact "Set point 2" closed)
°C 10.0 60.0 45.0 S 16424
217

Summer climatic curve, minimum external environment temperature set °C 20.0 40.0 23.0 S 16425
218

Summer climatic curve, minimum external environment temperature set °C 20.0 40.0 32.0 S 16426
219  Summer climatic curve, minimum external environment temperature set °C 6.5 25.0 15.0 S 16427
220

Summer climatic curve, minimum external environment temperature set °C 6.5 25.0 22.0 S 16428
221  Factory parameter, do not change - - - 0 S 16429
222

Summer climatic curve (fan coil), minimum water outlet temperature set
(active when remote contact "Set point 2" closed)
°C 6.5 25.0 7.0 S 16430
223 
Summer climatic curve (fan coil), maximum water outlet temperature set
(active when remote contact "Set point 2" closed)
°C 6.5 25.0 7.0 S 16431
224

Maximum temperature of the hot water to the radiant system °C 10.0 60.0 45.0 S 16432
225

Disabling the use of dew point temperature to calculate the minimum
limit of cold water to the radiant system:
On: As a minimum limit for cold water to the radiant system, the fixed
value is assumed“

” (par228)
Off: The dew point value is taken as the minimum limit of the cold water
to the radiant system“ “

” (par229)
- On Off Off S 16433
226 
TDew temperature
If the CRONO-TH is not connected, or in case of alarms  co 
_ read value is 0
°C Read Value S 8989
227

Offset between dew temperature and minimum cold water limit
to the radiant system :
To take into account the type of structure of the radiant system, the
minimum cold water temperature is given by the dew temperature plus
this value.
°C -10.0 10.0 -2.0 S 16434
228 
Value assumed, such as minimum temperature of the cold water to the
radiant system, if the dew point temperature is not available “  ”
(par226) or is set to “

” (par225) = On.
°C 12.0 25.0 18.0 S 16435
229

Since the calculation: “
e
”(par226) + “  ”(par227).
Value assumed, as the minimum temperature of the cold water to the
radiant system, if the dew temperature is available “

” (par226) and
is set to “

” (par225) = Off.
°C Read Value S 8990
230

Set point of the water leaving the heat pump for the air contioning:
Calculated through the climatic curve, taking into account dynamic
compensation, and temperature limits.
°C Read Value 8991
X = Parametro disponibile anche sul CRONO-TH
S = Password service
7. LIST OF PARAMETERS "SMART MT"
Parameter List MIRAI-SMI - Menu parameter list "Prg" SW Vers.1.9.7