71
1. DESCRIZIONE DEI COMPONENTI
GB
GB
5.2 Fixing
Fix the unit securely with the bolts (Ø 10 mm)
• drowned in the base
• to the antivibration supports resting on the ground
• to the fixing brackets in suspension
If the unit is installed in areas subject to heavy snowfall it will be neces-
sary to raise the unit to at least 200 mm above the normal level reached by
the snow or alternatively use the suspension bracket for the outdoor unit.
• If you use an L-shaped fitting, secure it as shown here.
• Make sure that the piping allows the proper flow of water even
at temperatures below zero degrees.
5.2 Condensate Drainage Pipes
Exhaust elbow
Hose pipe
5.1 Minimum operating spaces for maintenance
For all models.
Ensure compliance with the minimum operating spaces for maintenance.
mm
00
3
>
> 600 mm
>100
mm
> 600
mm
> 100 mm
5. INSTALLATION
Ensure that excessive snowfall
does not obstruct the normal air
flow of the unit.
Summary of Contents for EH0618DC
Page 106: ...106 Note...
Page 107: ...107 Note...
