emmeti EH0618DC, Installation And Use Manual

Page: 104 / 108

104
7. The warranty does not cover routine activities for periodic
maintenance of units (e.g. cleaning air filters) and the
consequences due to normal wear and tear (e.g. bushes
and bearings).
8. Any malfunctions, failures, faulty components, damage
directly or indirectly caused to persons, animals or objects
do not grant the customer the right to defer any payments
outstanding. Any delay in payment by the purchaser will
lead to suspension or cancellation of all warranties.
9. The warranty excludes any compensation for period of
“black-out unit”.
10. The units are guaranteed for a period of 2 years from
the date of purchase (which the User is obliged to prove
by means of a fiscally valid document– e.g. purchase
invoice or receipt).
11. Following any failure taking place, replacement unit is
excluded. Any measures taken to repair or replace parts
of unit will not alter the effective start date or duration of
the period of warranty; specifically, extension guarantee
is excluded. The faulty parts replaced will remain the
property of the Seller.
12. Once the warranty period has elapsed, the replacement
of any parts will be charged for in full according to the
current tariffs in force.
13. Each delivery is disciplined by these general terms of
warranty which are considered to be tacitly accepted
for all intents and purposes. Any eventual exception to
the terms of warranty which are established by means
of agreement between the parties, shall be valid only
if confirmed in writing by the Seller.
14. The Italian version of these terms will remain the
authoritative reference document for any translations
thereof.
15. Any disputes concerning these terms will fall under
the competent jurisdiction of the judicial authorities of
Pordenone (Italy).
GENERAL TERMS OF WARRANTY
1. The units are guaranteed against all manufacturing defects.
In warranty period all parts which the manufacturer deem
unquestionably to be faulty at origin as a result of materials
or manufacturing processes, will be replaced or repaired
free of charge. The transporting components cost and work
costs necessary for replacement activities are not included.
2. Any tampering with electrical system or structural part
of units, will result in forfeiture of the warranty terms.
3. The installer is installation’s responsible which must be
carried out professionally and in according to law, regula-
tions and legislation concerning current safety standards.
The manufacturer shall not be held liable for any damage
which may, directly or indirectly, be caused to persons,
animals or objects as a result of the failure to observe
current norms and all regulations and warnings indicated
in the installation, use and maintenance Instruction Booklet.
4. Installation must make allowance for full units accessibility,
this making it possible to perform any subsequent activities
(maintenance, replacement of parts, complete replacement
of unit, etc.) simply, rapidly and without risk of damaging
any items in the vicinity of unit (furnishings, false ceil-
ings, walls, plasterboard divisions, coverings, etc.). Any
additional costs or charges necessary for non-compliance
with these instructions, will lead to refusal of requests
for compensation or charges of any kind, unless otherwise
agreed in writing and confirmed by both the parties.
5. The warranty does not cover all parts which may result
as being faulty due to negligence, carelessness or neglect
while using the unit, incorrect installation, incorrect main-
tenance, maintenance carried out by unqualified and/or
unauthorised personnel, damage caused by accidents,
damage caused by transport, failures as a result of vol-
untary or accidental action, or circumstances which in any
event cannot be referred back to manufacturing defects.
6. In compliance with Article 1495 of Italian Civil Code, the
User will forfeit the right of warranty if the faults are not
reported to the manufacturer in writing within 8 days of
their discovery, unless otherwise agreed in writing and
confirmed by both the parties.
WARRANTY VALID FOR END-USER GB WARRANTY VALID FOR EXPORT MARKETS
EMMETI spa Via brigata Osoppo, 166 - 33074 Vigonovo frazione di Fontanafredda (PN) - Italia - Tel.0434567911 - Fax0434567901 - www.emmeti.com
Rev
. 0 -07-2019
Leggenda - IT Legend - GB
Unità esterna Outdoor Unit
Unità interna Indoor Unit
Scambiatore di calore Heat Exchanger
Ricevitore liquido Liquid Receiver
Valvola espansione elettronica Electronic Expansion Valve
Separatore gas/liquido Gas/Liquid Separator
Compressore Compressor
Capillare Capillary
Separatore olio Oil Separator
Valvola 4 vie Four-way Valve
Valvola di chiusura Stop Valve
Riscaldamento Heating
Raffreddamento Cooling
Filtro filter
Ventilatore fan
Sensore di temperatura di scarico discharge temperature sensor
Silenziatore scarico discharge silencer
Compressore inverter inverter compressor
pressostato AP high pressure switch
Scambiatore di calore unità esterna outdoor heat exchanger
A1:A-valvola di espansione elettronica dell’unità B1:B-valvola di espansione elettronica dell’unità A1:A-unit electronic expansion valve B1:B-unit electronic expansion valve
C1:C-valvola di espansione elettronica dell’unità D1:D-valvola di espansione elettronica dell’unità C1:C-unit electronic expansion valve D1:D-unit electronic expansion valve
A2:A-Sensore temperatura tubo del gas dell’unità B2:B-Sensore temperatura tubo del gas dell’unità A2:A-unit gas pipe temperature sensor B2:B-unit gas pipe temperature sensor
C2:C-Sensore temperatura tubo del gas dell’unità D2:D-Sensore temperatura tubo del gas dell’unità C2:C-unit gas pipe temperature sensor D2:D-unit gas pipe temperature sensor
A3:A-sensore di temperatura del tubo del liquido B3:B-sensore di temperatura del tubo del liquido A3:A-unit liquid pipe temperature sensor B3:B-unit liquid pipe temperature sensor
C3:C-sensore di temperatura del tubo del liquido D3:D-sensore di temperatura del tubo del liquido C3:C-unit liquid pipe temperature sensor D3:D-unit liquid pipe temperature sensor
Model
Serial Number
Date installation/first running
To make the guarantee valid we ask you to follow the below rule:
-
Fill in the Certificate of Guarantee in a clear and readable way, by Installer.
The missing consignment of the Certificate of Guarantee or the wrong filling in of it involves the loss of the
guarantee.
Seller
Company
Street
Zip Town Country
Slip “A” for End User
To be kept
(Please print in block
letters).


GUARANTEE CERTIFICATE Slip A
GUARANTEE CERTIFICATE Slip B
GUARANTEE CERTIFICATE
Slip C
Model
Serial Number
Date installation/first running
User
Street
Zip
Town
Country
Slip “B” for Distributor
(Please print in block
letters).
Installer
Street
Zip Town Country
After sale service
Street
Zip Town
Country
Model
Serial Number
Date installation/first running
User
Street
Zip
Town
Country
Slip “C” for Installer
(Please print in block
letters).
Distributor
Street
Zip Town
Country
After sale service
Street
Zip Town
Country

GB GB
GB GB
GB GB
Rev
. 0 -07-2019