GB
70
Emptying the water from the 25 liter inertial storage:
close the valves
C,D,E
and
F
.
Open the ball valve (
1
) to drain the water from the primary
closed circuit.
If the system is added with antifreeze liquid, it must not be
left free because it is polluting.
5.3 Emptying the DHW storage tank
Make sure you have turned off the power: set the main
system switch to "off".
Emptying the DHW storage tank: check that the DHW inlet
tap (
3
) is closed.
Open a DHW utility (e.g. hot water tap of the sink in the
bathroom) to discharge the system pressure.
Remove the DHW water drain cap (2) located at the bottom
of the domestic hot water storage tank.
1 Inertial storage water drain
2 Domestic hot water storage water drain (DHW)
3 Domestic hot water inlet (DHW)
1
2
ACS
3
C D E F
Inertial storage
water drain
DHW storage
water drain
DHW inlet
Summary of Contents for ECO HYDRO KIT ITM-200 B
