emmeti ECO HYDRO KIT ITM-200 B, Installation And Use Manual

Page: 72 / 80

GB
72
Integrative electrical heater DHW
An electrical heater electrically connected to the ITM-200 B
electrical terminal block is installed in the central part of the
storage of domestic water.
The activation of this heating is entrusted to an external contact
(e.g. Mirai-Smi)
Electrical heater - Technical data
Operating conditions: 6 bar /95°C max
Thermostat probe holder: Length 275 mm - Copper
Electric power 1,2 kW 230V~ 50Hz
Thermostat - Technical data
NC safety temperature: 90 °C +/- 5°C
Contact rating: 20A 250V
Ambient temperature: T105
NOTE: For the correct
operation of the electrical
heater make sure that the
thermostat is adjusted in
the position shown in the
photo here