___________________________________________________________________________________________________
_________________________________________________________________________________________
Page 9 / 30 EZM7750_ENG_VER11
2.5 Panel Mounting:
Insert To Panel:
χχ
WARNING: During the equipment is putted in hole on the metal panel while
mechanical installation some metal burrs can cause injury on hands, you should be
careful. Installation parts of equipment should be tighten properly. The equipment can
be drop from mounting place reason of vibration if installation parts leave soft.
1- Prepare panel cut-out.
2- Check front panel gasket position.
3- Insert the device trough the cut-out.
Installation Fixing Clamp:
The unit is designed for panel mounting.
Fixing is by mounting clamp.
1. Insert the unit in the panel
cut-out from the front.
2. Insert the mounting clamp
from the rear side of the device
and tighten the fixing screws
to secure the unit against the panel.
1
2
3
1
2