___________________________________________________________________________________________________
_________________________________________________________________________________________
Page 26 / 30 EZM7750_ENG_VER11
Set1
0
Out2
Out1
Out1 pulse time = 0 or Out1 pulse time!=0
Out2 pulse time = 0 or Out2 pulse time!=0
Set2
Reset
Set1
0
Out2
Out1
Out1 pulse time = 0 or Out1 pulse time!=0
Out2 pulse time = 0 or Out2 pulse time!=0
Set2
Reset
Set1
Set1
0
0
Out1
Out1
Out1
Out1
Out1 pulse time != 0
Out1 pulse time != 0
Out1 pulse time = 0
Out1 pulse time = 0
Out2 pulse time != 0
Out2 pulse time = 0
Out2
Out2
Set2
Set2
Reset
Reset
Set1
Set1
0
0
Out1
Out1
Out1
Out1
Out1 pulse time != 0
Out1 pulse time != 0
Out1 pulse time = 0
Out1 pulse time = 0
Out2 pulse time != 0
Out2 pulse time = 0
Out2
Out2
Set2
Set2
Reset
Reset
Set1
Set1
0
0
Out1
Out1
Out1
Out1
Out1 pulse time != 0
Out1 pulse time != 0
Out1 pulse time = 0
Out1 pulse time = 0
Out2 pulse time != 0
Out2 pulse time = 0
Out2
Out2
Set2
Set2
Reset
Reset
Counting Direction : P --> 0 (Counting to downwards)
Counting Direction : P --> 0 (Counting to downwards)
Output function - 6 ( Automatic Reset)
Output function -7
Counting Direction : 0 --> P (Counting to upwards)
Counter, Totalizer Counter
Timer, Chronometer
Counter and
Totalizer Counter
When the actual value reaches SET1 value, OUT1 becomes active. If Out1 was
selected periodical, at the end of this time OUT1 changes position. If Out1 was
selected indefinite, OUT1 changes position related to Out2 or reset input.
When the actual value reaches “0”, OUT2 becomes active and actual value makes
equal to SET2 value. When the Out2 is active, counting is continues but actual value
display shows “0”.
When the actual value reaches SET1 value, OUT1 becomes active.If Out1 was
selected periodical, at the end of this time OUT1 changes position. If Out1 was
selected indefinite, OUT1 changes position related to Out2 or reset input.
When the actual value reaches SET2 value, OUT2 becomes active and counting
stops.If Out2 was selected periodical, at the end of this time OUT2 becomes inactive
and actual value resets.
When the actual value reaches SET1 value, OUT1 becomes active. If Out1 was
selected periodical, at the end of this time OUT1 changes position. If Out1 was
selected indefinite, OUT1 changes position related to Out2 or reset input.
When the actual value reaches “0”, OUT2 becomes active and counting stops . If Out2
was selected periodical, at the end of this time OUT2 becomes inactive and SET2
appoints to actual value.
If actual value is equal or bigger than the SET1 value, OUT1 becomes active. If actual
value is less than the SET1 value, OUT1 becomes inactive.
If actual value is equal or bigger than the SET2 value, OUT2 becomes active. If actual
value is less than the SET2 value, OUT2 becomes inactive
If actual value is equal or less than the SET1 value, OUT1 becomes active. If actual
value is bigger than the SET1 value, OUT1 becomes inactive.
If actual value is equal or less than “0”, OUT2 becomes active. If actual value is bigger
than the “0”, OUT2 becomes inactive.
Counting Direction : P --> 0 (Counting to downwards)
Counting Direction : 0 --> P (Counting to upwards)