___________________________________________________________________________________________________
_________________________________________________________________________________________
Page 18 / 30 EZM7750_ENG_VER11
4.1 Set-1 & Set-2 Adjustments:
Observing and Changing to SET1 values
Press
SET1
button. The Set Value Display shows set value of SET1.
When the cursor to become visible as flashing digit on the display, press
button.
You can change to SET1 value by
button for the cursor digit position changing,
button for the cursor digit value changing.
Press
button for saving to memory of SET1 value. When the value saved in memory,
the cursor gets lost.
Observing and Changing to SET2 values
Press
SET2
button. The Set Value Display shows set value of SET2.
When the cursor to become visible as flashing digit on the display, press
button.
You can change to SET1 value by
button for the cursor digit position changing,
button for the cursor digit value changing
Press
button for saving to memory of SET1 value. When the value saved in memory,
the cursor gets lost.
4.2 Observing and changing parameter values:
Entering Program Mode:
You can press
P
button for entering program mode.
Actual and Set value display show first parameter of determined operating mode when you
enter Program mode.
You can select your requested parameter as change value by
button.
You can change to parameter value by
and
buttons.
You can press
button for save in memory of new parameter value.
After process you can press
P
button for exiting to program mode.
4.3 Protection of Parameters:
You can see Protection Parameter
“Pro-PS”
to after Parameter-30. Can be adjust to it from
“0001” to “9999”. If parameter value is “0000”, this protection will be disable.
If you adjust to this parameter value is different than zero, when you can entering to
programming mode , device will ask you password value and
“Psuurd”
message will shown
on the display.