___________________________________________________________________________________________________
_________________________________________________________________________________________
Page 25 / 30 EZM7750_ENG_VER11
Set1
Set1
0
0
Out1
Out1
Out1
Out1
Out1 pulse time != 0
Out1 pulse time != 0
Out1 pulse time = 0
Out1 pulse time = 0
Out2 pulse time != 0
Out2 pulse time = 0
Out2
Out2
Set2
Set2
Reset
Reset
Set1
Set1
0
0
Out1
Out1
Out1
Out1
Out1 pulse time != 0
Out1 pulse time != 0
Out1 pulse time = 0
Out1 pulse time = 0
Out2 pulse time != 0
Out2 pulse time = 0
Out2
Out2
Set2
Set2
Reset
Reset
Set1
Set1
0
0
Out1
Out1
Out1
Out1
Out1 pulse time != 0
Out1 pulse time != 0
Out1 pulse time = 0
Out1 pulse time = 0
Out2 pulse time != 0
Out2 pulse time = 0
Out2
Out2
Set2
Set2
Reset
Reset
Set1
0
Out1
Out1
Out1
Out1 pulse time != 0
Out1 pulse time = 0
Out1 pulse time = 0
Out2 pulse time != 0
Out2 pulse time = 0
Out2
Out2
Set2
Reset
When the actual value reaches SET1 value, OUT1 becomes active. If OUT1was
selected periodical, at the end of this time OUT1 changes position. If Out1 was
selected indefinite, OUT1 changes position related to OUT2 or RESET input.
When the actual value reaches SET2 value, OUT2 becomes active and actual value
resets. If OUT2 was selected periodical, at the end of this time OUT2 changes
position.
This condition, if OUT1 is active, OUT1 and OUT2 becomes inactive together.
Counting Direction : P --> 0 (Counting to downwards)
Counting Direction : P --> 0 (Counting to downwards)
When the actual value reaches SET1 value, OUT1 becomes active. If OUT1was
selected periodical, at the end of this time OUT1 changes position. If Out1 was
selected indefinite, OUT1 changes position related to OUT2 or RESET input.
When the actual value reaches “0”, OUT2 becomes active. SET2 value appoints to
actual value. If OUT2 was selected periodical, at the end of this time OUT2 changes
position. This condition, if OUT1 is active, OUT1 and OUT2 becomes inactive
together. If Out2 was selected indefinite, OUT2 is active until the RESET input
becomes active.
Output function - 4 ( Automatic Reset)
Output function - 5 ( Automatic Reset)
Counting Direction : 0 --> P (Counting to upwards)
Counting Direction : 0 --> P (Counting to upwards)
Counter, Totalizer Counter
Timer, Chronometer
Counter, Totalizer Counter
Timer, Chronometer
When the actual value reaches SET1 value, OUT1 becomes active. If OUT1was
selected periodical, at the end of this time OUT1 changes position. If Out1 was
selected indefinite, OUT1 changes position related to OUT2 or RESET input.
When the actual value reaches SET2 value, OUT2 becomes active and counting
stops. If OUT2 was selected periodical, at the end of this time actual value resets and
OUT2 becomes inactive.
When the actual value reaches SET1 value, OUT1 becomes active. If OUT1 was
selected periodical, at the end of this time OUT1 changes position. If Out1 was
selected indefinite, OUT1 changes position related to Out2 or reset input.
When the actual value reaches “0”, OUT2 becomes active and counting stops. If
OUT2 was selected periodical, at the and of this time OUT2 becomes inactive and
SET2 value appoints to actual value.
When the actual value reaches SET1 value, OUT1 becomes active. If OUT1was
selected periodical, at the end of this time OUT1 changes position. If Out1 was
selected indefinite, OUT1 changes position related to OUT2 or RESET input.
When the actual value reachs SET2 value, OUT2 becomes active and actual value
becomes “0”. When the Out2 is active, counting is continues but actual value display
shows SET2 value.