EMIT ETS1, Instructions For Use Manual

Page: 10 / 25

ETS1 ver. 1.22
New Race
This function resets the counter for all registered tags and empties the flash
memory in the ETS1. The unit is now ready for use in a new race.
Code
CCC
< Read Tag Start >
< Bckup Fin. Finish >
Choose one of the available choices and enter a 3-digit code from 001 to 229 with
the numeric keys, followed by '
Enter '.
‘Read Tag’ allows an arbitrary code from 250 to 253 for reading tags.
‘Bckup. Fin.’ sets the code 249. Should only be used when you need an extra
backup ETS1 at the finish.
‘Finish’ sets the code 248 and activates both loop1 and loop2.
‘Start’ sets the code 0, which resets the internal clock in the emiTags.
The set code for the ETS1 decides what kind of registration you will get and which
frequency the radio will transmit on. Therefore it is very important to set the right
code. We recommend using the following codes:

Finish, double antenna loops - 248

Backup, finish - 249

Finish, single antenna loop - 90

Split time/forewarning - 70

Registration of penalty loops - 67

Relay handover - 66

Start - 0
Page
10