EMIT ETS1, Instructions For Use Manual

Page: 15 / 25

ETS1 ver. 1.22
Synchronizing the clock
You now may set the ETS1’s internal clock. You see the running time in the white
field up to the left. You may leave it as it is, set it on the ETS1, synchronize it with
the PC clock or set a new fixed starting time. Remember that the ETS1’s internal
clock must be synchronized with the start clock.
It is also important to set the station number. See the tag reader’s code up to the
right. The most used codes are as follows:

Finish, double antenna loops - 248

Backup finish - 249

Finish, single antenna loop - 90

Split time/forewarning - 70

Penalty loop registration - 67

Relay handover - 66

Start - 0
Press 'Next' to continue.
The timing display
Page
15