ETS1 ver. 1.22
When using a serial cable with a USB converter, check that the program chooses
’serial communication’.
Decide how to do and update the timing
Normally you only need to press ’Next’. Note that you may choose if you want to
use the tag’s or the tag reader’s time. If you prefer using the tag’s time, you will
need a tag reader at the starting point to start the tag’s clock.
’Intervall for starttidssjekk’ (Interval for checking the starting time): This is where
you decide how big the deviation between the tag’s time and the calculated time
may be before a warning appears in the timing grid.
’Utlesning’ (Reading): Is only used if you wish to read the tags after they have passed
the finishing line.
The tag system will normally ignore all incoming times from before the competitor
has started and from after he has finished the competition. You may decide which
error messages you want to show in the timing grid by choosing ’advanced settings’.
Page
14
Summary of Contents for ETS1
Page 25: ...ETS1 ver 1 22 Page 25 ...
