Emerson XWEB3000 EVO Operating Manual Download Page 7 | Manualshive

Page: 7 / 100

background image

1592010880 XWEB3000_5000 EVO OPR GB r1.0 2014.11.28

7/100

System language. It represents the language that the system uses for the parts that do not refer to a user,
thus  to  its  language. For  example, for  alarm  or  system  notifications.  To  specify  your  preference, select  the
language from the list and press "Next". This language is also used for the Admin user.
Local  keyboard.  Indicate  the  configuration  of  the  keyboard  physically  connected  to  the  XWEB.  This
configuration is not linked to the configuration of your PC's keyboard. Once you have selected your preferred
parameters, press "Next" to continue with the procedure.

c)  System Identification.

These boxes describe the system, displaying both the name and several parameters that can be used to
indicate to the user the references of those in charge of maintenance or servicing of the machine. Once you
have selected your preferred parameters, press "Next" to continue with the procedure.

d) Date/time time-zone setup

Configuration parameters of the XWEBEVO time. The time can always be changed by hand; or automatically
synchronised with an NTP time-server with a daily/weekly/monthly interval. We recommend using an NTP
server that is geographically in your vicinity, for example, in your own country. We recommend asking your
network administrator for the name of the NTP server that will be used.

«
...
5
6
7
8
9
...
»

Summary of Contents for XWEB3000 EVO





































































































Reviews:

No comments

Related manuals for XWEB3000 EVO

MyDlink DCH-S150

Brand: D-Link Pages: 8

Brand: M86 Security Pages: 96

CombiFinder Plus

Brand: LaserLiner Pages: 10

MIG 208 Alu Synergy

Brand: Magnum Pages: 24

Brand: ABICOR Pages: 16

Brand: Panasonic Pages: 28

Brand: Akura Pages: 11

Nexus Contractor SP-5NXC/T

Brand: Speco Pages: 4

RAZORWELD ARC 630

Brand: Xcel-Arc Pages: 36

Brand: 2gig Technologies Pages: 4

Brand: QSC Pages: 4

Brand: jablotron Pages: 2

Brand: F.F. Group Pages: 40

Brand: E-Vision Pages: 20

Brand: Idis Pages: 12

Brand: Alecto Pages: 25

Brand: Quested Pages: 15

Brand: AUTO ARC Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands