1592010880 XWEB3000_5000 EVO OPR GB r1.0 2014.11.28
11/100
j)
Printer setup
The printer can be connected locally or use a network printer. To obtain a list of tested printers, go to
www.dixell.com
and visit the XWEB support section
or click on the following
link:
http://www.emersonclimate.com/europe/ProductDocuments/DixellLiterature/PrintersXWEB.pdf
Local printer
Once you have selected the local printer, select the port that the printer is connected to through means
of the Local printer list box and then select the correct print driver. If your printer model is not listed,
select the model that is most similar in terms of name and presence from the list.
Windows network printer
Once you have selected Windows Network Printer, the system automatically searches for the available
network printers. After a few minutes (based on the size/complexity of the network), the full list of printers
will appear. If your printer does not appear in the list, it cannot be used; try to repeat the search
procedure. After having selected the printer, select the appropriate print driver. If your printer model is
not listed, select the model that is most similar in terms of name and presence from the list.
k) Auxiliary output setup
The boxes set the normal logic for the XWEB AUX relays
The disabling of the ‘follow alarm delay’ box energises the relay in sync with the reading of the alarm
status.
