1592010880 XWEB3000_5000 EVO OPR GB r1.0 2014.11.28
21/100
Enabling of the variable for "DeviceView" page.
The variable is inserted in the DeviceView page if the box corresponding to the same variable is
enabled. By default, each variable is enabled in this context.
Enabling of the Notify variable
The variable is inserted in the snapshot table, in the instrument notifications. For example, as seen in the
image below, the variable is inserted in "Row 3" of the table. All values in this table are relative to those
displayed when the notification is sent.
Enabling of the Graph variable
The variable is inserted in the snapshot graph, in the instrument notifications. For example, as seen in the
image below, the variable is inserted in ''Row 4'' of the graph.
Clone configuration of an instrument
The XWEB-EVO allows for the cloning of the configuration of a device to reduce the number of configuration
operations on the network instruments. To do this, select the source control and click on "Clone Settings".
From the drop-down menu select:
-
“Everything”: applicable only to compatible instruments. For a copy of all device parameters.
