1592010880 XWEB3000_5000 EVO OPR GB r1.0 2014.11.28
27/100
List of controllers
The list of configured controllers is always present on the left-hand side of the screen. Clicking on the lens -
as demonstrated below - selects the "Category Settings" tab which displays the list of all variables configured
as alarms.
The buttons are also present on the left-hand side of the window.
1.
“Clone Alarm Settings” for copying between instruments of the same alarm-category settings.
2.
“Save Configuration” to apply any modifications.
Attention
: the save operation must be performed
each time the tab is changed otherwise any modifications will be lost.
On the right-hand side of the window are three different tabs identifying the below described configuration
parameters.
Alarm-Category Parameters Tab
The Alarm-Categories is a list of types of alarm, with the purpose of grouping the alarms that must be dealt
with in the same manner, from a point of view concerning alarm detection and their notification.
For example, it is possible to create a category named "Temperature Alarms" or "Pressure Alarms"; and
associate all alarms of this type with the above-mentioned alarm-categories.
Access the tab in order to scroll down the list of configured alarm-categories. Each alarm-category displays a
list of notification levels (as demonstrated above).
- press "+" to add a new category.
- modify the category by pressing
- eliminate the category by pressing
- to display the configured alarms for the category, press
