82 Chapter 6 Web Page Of MSC-C
SmartCabinet Integrated Solution User Manual
The remote service setting includes three parts:
Request RDU remote
,
Cancel RDU remote
and
Replace Host
.
Meanwhile, you can set the communication parameters of remote service system.
z
Request RDU remote: used to establish remote service relationship
1) Type the self-defined customer name in the
End-User
textbox;
2) Choose the contactor for remote service in the
Contact Person
textbox, when the contactor is chosen, the
corresponding mobile and email will be displayed;
Note
The contactor for remote service must be set through
System Options
->
User Management
in advance, and you must provide
the mobile or email, or the service request cannot be conducted. Refer to
User Management
in this section for detailed setting
method.
3) Choose
Frequency of Reporting
:
‘
Monthly
’
,
‘
Seasonal
’
;
4) Click
OK
to send the remote service request.
z
Cancel RDU remote: used to cancel the established remote service
Choose
Cancel RDU remote
and click
OK
to send a command to cancel the current remote service.
Note
Canceling the remote service is effective only under the precondition that the remote service has been established, otherwise, a
prompt of failure will pop up after you click
OK
.
z
Replace Host: used to replace the local host during remote service
When the host that has established remote service need to quit, but you want to remain the established remote
service relationship, you need to replace the local host to participate in the remote service. The detailed setting
method is the save as
Request RDU remote
, besides, type the hardware serial number of the replaced host.
User Management
Click the
User Management
submenu under the
System Options
menu, the page shown in Figure 6-57 pops up.
Figure 6-57 User management
On the page shown in Figure 6-57, you can add user, modify user and delete user.
z
Add user
1. Type username in the
User Name
textbox;
2. Choose the user authority;
3. Configure the user password, which cannot be vacant and should contain at least six letters or digits.
4. Re-type the password in the
Confirm
textbox;
5. (Optional) Type the user telephone number, which can use the following digits and characters: 0123456789, +;
6. (Optional) Type the email address;
7. Click the
Add
button, the dialog box of Security authentication pops up, as shown in Figure 6-16. Type the login
password of current user, and click
OK
to add a new user.
