Chapter 6 Web Page Of MSC-C 59
SmartCabinet Integrated Solution User Manual
Figure 6-13 Setting page
After the homepage enters setting status, the setting method is as follows:
1. Display setting
Click the
Set Display
button, the window shown in Figure 6-14 pops up.
After select the device name, the device signals will be displayed in the lower box. You can select the device signals
to be displayed according to your needs, however, the selected signals cannot exceed 4. At last, click
OK
.
Figure 6-14 Display setting
Note
There is no need of setting the display mode of temperature, humidity and 4DI signals, and the effective signals will be directly
displayed on the page.
2. Save
Click the
Save
button, all configuration will be saved and the page returns to view status.
3. Back
Click the
Back
button, the homepage will return to view status from setting status.