Emerson Rosemount CT4400 Reference Manual Download Page 4 | Manualshive

Page: 4 / 106

background image

Associated publications

Quick Start Guide

Compliance approvals

This product complies with USA 21 CFR 1040.10. It is also designed and manufactured
under an approved quality management system to ISO 9001:2015.
Emerson and the Rosemount CT4400 Gas Analyzer have satisfied the requirements
for applying the CE marking to the Rosemount CT4400 Gas Analyzer.
This equipment meets all requirements of the EMC and Low Voltage directives.

Waste disposal

Do not dispose of measuring tools into household waste.
Only for EC countries:
In accordance with European Directive 2012/19/EU for Waste Electrical and Electronic
Equipment and its implementation into national right, measuring tools that are no
longer usable must be collected separately and disposed of in an environmentally
correct manner.

Safety and information notices

DANGER

WILL CAUSE DEATH

Failure to follow this warning will result in death or serious injury to personnel.

WARNING

DANGER TO PERSONNEL

Failure to follow this warning may result in serious injury to personnel.

WARNING

SAFETY COMPLIANCE

Repairs or alterations are not permitted on any flame-proof paths, features, or joints.

Failure to follow this warning may compromise the product’s safety protection method and void the product certification.

NOTICE

Important messages will appear in this format.

Safety information

All authorized users, including installation, operation, and maintenance personnel,

MUST

observe the following safety

precautions and warnings.

DANGER

ELECTRIC SHOCK

The analyzer operates using mains voltage that is dangerous to life. Make sure that the power

ON/OFF

switch at the rear of the

panel is set to

OFF

and the power cable plug is removed

BEFORE

removing the top cover.

THE ANALYZER MUST BE EARTHED USING A GROUNDED THREE CORE CABLE suitable for the rating defined in the General
Characteristics (

).

Failure to observe this precaution will cause death, personal injury, and/or damage to persons and/or property.

4

«
...
2
3
4
5
6
...
»

Summary of Contents for Rosemount CT4400











































































































Reviews:

No comments

Related manuals for Rosemount CT4400

Brand: Icare Pages: 3

Brand: QUBINO Pages: 2

Brand: Vaisala Pages: 90

Brand: Vaisala Pages: 4

Brand: YOKOGAWA Pages: 16

ENERGETIQ LDLS EQ-99X

Brand: Hamamatsu Pages: 45

Brand: Genie Pages: 14

SoundAdvisor NMS045

Brand: Larson Davis Pages: 64

Brand: Tenma Pages: 52

Brand: Sage Pages: 75

AcuRev 1310 Series

Brand: AccuEnergy Pages: 109

Brand: Suaoki Pages: 79

Brand: DAKOTA ULTRASONICS Pages: 51

Brand: 4iiii Pages: 35

Brand: E+E Elektronik Pages: 9

Brand: Keysight Pages: 26

Brand: Cewe Pages: 8

Brand: Hanna Instruments Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands