Emerson Rosemount 326P, Quick Start Manual

Page: 31 / 48

The extended functions menu opens.
3. Select SIM from the menu.
4. Press Set .
The simulation menu opens. The first option is
SEL
.
Set the simulation output state
Follow these steps to set the output state for a simulation.
Procedure
1. Select
SEL
from the simulation menu.
2. Press and hold Set to change the simulation menu to OU .
3. For three-wire operation, select
S.OU1
from the simulation menu.
For two-wire operation, skip to step Step 6 .
4. Press and hold Set to set the value.
• OPEN : output 1 not active/open
• CLOS : output 1 active/closed
5. Press
Mode/Enter
.
6. Select S.OU2 from the simulation menu.
7. Press and hold Set to set the value.
• If OU2 = Hnc , Hno , Fnc or Fno (not in two-wire operation):
— OPEN : output 2 not active/open.
— CLOS : output 2 active/closed.
• If
OU2
=
I
or
InEG
:
— 3.60-21.10 mA in steps of 0.01 mA.
8. Press
Mode/Enter
.
Set the simulation pressure value
The pressure transmitter will display the simulation pressure value during the simulation.
Follow these steps to set the pressure value for the simulation.
Procedure
1. Select SEL from the simulation menu.
2. Press and hold Set to change the simulation menu to Proc .
3. Press Mode/Enter .
The pressure transmitter displays S.Pr .
4. Select S.Pr from the simulation menu.
5. Press and hold Set to modify the pressure value.
6. Press
Mode/Enter
.
Quick Start Guide Operation
00825-0100-4327 January 2019
Quick Start Guide 31