Emerson Rosemount 326P, Quick Start Manual

Page: 24 / 48

Change the update rate and display orientation
The update rate sets how often the pressure transmitter displays new data. The
diS
parameter also sets the orientation of the display. Follow these steps to change the update
rate and orientation of the display.
Procedure
1. Select
diS
from the extended functions menu.
2. Press and hold Set to modify the parameter value.
3. Select an update rate or an update rate with a rotated display.
• d1 : Updates the measured values every 50 ms.
• d2 : Updates the measured values every 200 ms.
•
d3
: Updates the measured values every 600 ms.
• rd1 , rd2 , rd3 : Rotates the display by 180° and selects the corresponding update
rate.
• OFF : Deactivates the display while in run mode. When a button is pressed, the
pressure transmitter displays the system pressure for 15 seconds. Pressing
Mode/Enter
again activates the display. The LED indicators remain active when
the display is deactivated. Also, the pressure transmitter displays error messages
when the display is deactivated.
3.3.3 Set output signals
This section provides instructions for setting output functions and limits.
Setting output functions
Follow these steps to set the function of output 1 and output 2.
Procedure
1. Select
OU1
from the menu.
2. Press and hold Set to modify the parameter value.
3. Set the switching function.
• Hno : hysteresis function/NO
• Hnc : hysteresis function/NC
• Fno : window function/NO
• Fnc : window function/NC
4. Press
Mode/Enter
.
5. Select OU2 from the menu.
6. Press and hold Set to modify the parameter value.
7. Set the function.
•
Hno
: hysteresis function/NO
Operation Quick Start Guide
January 2019 00825-0100-4327
24 Quick Start Guide