Emerson iPro, Installation And Operation Manual

Page: 13 / 80

iPro Hardware Overview Overview • 5
4 Overview
4.1. iPro Hardware Overview
The iPro Case Controller is a microprocessor-based fully programmable controller. The controller is powered at 24VAC and uses a high
speed performance 32-bit ARM9 (200 MHz) microprocessor. The controller has 15 digital outputs, 20 digital inputs, 10 analog inputs
and six (6) analog outputs onboard. Technical specifications for onboard I/O can be found in Section 6.1., iPro Analog Inputs , Section
7.1., iPro Digital Inputs , Section 8.1., iPro Digital Outputs , and Section 9.1., iPro Analog Outputs . The iPro Case Controller has three
(3) serial communication ports, one (1) TCP/IP port and one (1) USB port. The RS485 master port is used to make the BACnet MS/TP
connection to E2E, and the RS485 slave port is used to connect to peer case controllers within a refrigeration circuit. The CAN Bus port
is used for iPro to communicate with other peripheral devices such as the XEV20D and IPX106D.
Figure 4-1 - iPro Wiring and Connections
Figure 4-2 - iPro Hardware