Instruction Manual
D103460X012
D3 Valve with easy-Drive Actuator
October 2017
22
Parts Ordering
Each D3 control valve is assigned a serial number, which can be found on the nameplate. Refer to the number when
contacting your
or Local Business Partner for assistance or when ordering replacement parts.
WARNING
Use only genuine Fisher replacement parts. Components that are not supplied by Emerson Automation Solutions should
not, under any circumstances, be used in any Fisher valve, because they may void your warranty, might adversely affect the
performance of the valve, and could cause personal injury and property damage.
Parts Kits
TRIM KITS
Port Diameter (inches)
0.375
0.75
1
Standard trim kit (Contains keys 2, 3, 4, and 43)
RD3STDX0012
RD3STDX0022
RD3STDX0032
Carbide trim kit (Contains keys 2, 3, 4, and 43)
RD3CARBX042
RD3CARBX052
RD3CARBX062
PACKING KIT
Contains keys 4, 10, 11, 43, and 44
RD3PACKX012
VALVE STEM
Key 16
GE48049X012
Parts List
Note
Recommended spare parts are included in the Parts Kits shown at the
top of this page. For additional information or for part numbers not
shown, contact your
or Local Business Partner.
Key
Description
1
Valve Body
2*
Seat Ring
3*
Valve Plug
4*
Bonnet O‐ring
5
Bonnet Nut
6
Spring Pin (or alternate pipe plug) (2 req'd)
7
Bonnet
8
Packing Retainer
9
Belleville Springs (5 req'd)
10*
Anti‐Extrusion Washer (2 req'd)
11*
Packing Set
Key
Description
12
Packing Spacer
13
FloPro
Half
14
FloPro
Half
15
Hex Socket Head Cap Screw (2 req'd)
16*
Stem
18
O-ring
20
Locknut
25
Stem O-ring
27
Stem Nut
34
Valve Nameplate
41
Drive Screw (2 req'd)
43*
Groove Pin
44*
High Performance Fluorinated Grease Packing Lubricant
58
Enclosure O-ring
59
Motor/gearbox/controller assembly
60
Upper Enclosure
61
Lower Enclosure
62
Motor Cap Screws (4 req'd)
63
Motor Cap Screw Washers (4 req'd)
64
Enclosure Cap Screws (8 req'd)
65
Enclosure Cap Screw Retaining Washers (8 req'd)
66
Ground Screw
68
Certification Nameplate
69
easy-Drive Label
70
Uninterruptable Power Supply
*Recommended spare parts
