Product data sheet
FieldQ
FieldQ
Copyright © Emerson. The information in this document is subject to change without notice. Updated data sheets can be obtained from our website
www.emerson.com/fieldq or from your Emerson Automation Solutions - Actuation Technologies Center:
America’s:
+1 281 477 4100
Europe:
+36 22 53 0950
Asia/Pacific:
+65 67 77 8211
1.607.01 Rev. 2 Page 6 of 8
March 2019
Imperial Model String Configuration
QC40 with ASI Digital Bus Communication
QC40
-
U WP G S A 1
-
0040 I NS 0 IP 0 1
Control module
Conduit connections
Protection method
Control module options
Action
Future Expansions
Language
Bottom electrical entry
Top electrical entry
Pneumatic exhaust
Manual Control
Speed control
Mounting Options
IPT Device size actuator
Control module
IPT Device size for actuator:
QC40
Control module with AS-I communication
0040
Q40 actuator
Connections
0065
Q65 actuator
U
Imperial - Conduit: Top: 3/4""NPT; Bottom 1/2""NPT
Pneumatic entry 1/4"NPT
0100
Q100 actuator
0150
Q150 actuator
Protection method
0200
Q200 actuator
WP
Weather Proof IP66/NEMA4X
0350
Q350 actuator
P4
Non Sparking - Ex nA / Ex tb - ATEX, IECEx
0600
Q600 actuator
B4
Non Sparking Ex nA / Ex tb - INMETRO/Brazil
0950
Q950 actuator
F4
Non Incendive N.I. - FM
1600
Q1600 actuator
C4
Non Incendive N.I. - CSA
0000
No IPT probe
Control module options (position feedback)
Mounting Options
G
Mechanical switch (Gold Plated)
U
Uninstalled
N
2-wire prox. switch (NAMUR)
I
Installed/Tested to actuator
Action
Speed control
S
Single acting (Spring Return)
NS
No Speed Control
D
Double acting
N1
Spring Return (1x throttle)
F
Double acting Fail "In Last Position"
N2
Double acting (2x throttle)
Future Expansions Code
Manual Control
K
Standard Yellow
0
No Manual Control
Language Code
1
1x "Push&Lock", anodized aluminum
1
English
2
2x "Push&Lock", anodized aluminum
2
Portuguese
3
1x "Push&Lock", Stainless Steel
3
French
4
2x "Push&Lock", Stainless Steel
Pneumatic exhaust
IP
IP65/NEMA4 rated exhaust
IN
Non metalic exhaust / Check valve
Top conduit (Glands & Plugs, note 3)
0
Transport plug
Bottom conduit (Glands & Plugs, note 3)
1
Metal blind plug
4
Eurofast (M12)
5
Minifast (7/8”)
Notes:
1. For more detailed information on hazardous area protection methods, certification agencies and suitable hazardous area see section
Selection guide Q-Series Control Module certifications
on page 2.
- For QCQ40 and QC54 control modules: CSA Approval only for class II and III
- For QCQ40 control modules: Switch type “G” is only available with protection code “F4” and “WP”
2. 2x Manual Control are only required in case of Double acting with Fail in Last Position function.
3. For QC40 and QC54: Quick Connector options are only available with QC40 (ASI) and QC54 (FF). Prices for Glands & Plugs are per piece.
The Quick Connectors, as listed, are excluded from areas with a potential explosion hazard caused by gasses, dust or fibers.
4. No separate pneumatic module required. Pneumatic function is integrated in the module.
5. For applications below -20°C (-4°F), the base actuator must be fitted with Low Temperature seals.
For use in atmospheres with a potential explosion hazard, the minimum temperature is -25°C / -13°F.