User manual IPM500 EN rel1.0.doc
iPro Series
14/48
5.1.7
UNIT STATUS SCREEN – FROM SYSTEM STATUS SCREEN
This screen is accessible selecting the entry “Unit status” in the service menu.
Main information:
Unit regulation probe: here is shown the regulation probe related to the selected unit.
Unit status: identify the state of the selected unit: ON, OFF, ONLINE and OFFLINE
Steps and power status: here is shown the number of used/total power steps available on the unit.
Other then this is shown the percentage of the delivered power for the single unit.
Alarm notify: if there is an alarm or notify active an alarm icon will be shown.
Backup unit notify: this part is visible if the unit is actually the backup unit
Unit weigth: here is shown the configured weight for the single unit.
Working hours: here is shown an average value of the working hours for the power steps of the unit.
Starts number: here is shown an average value of the number of starts for the power steps of the
unit.
Main actions:
Previous key: this key is used to go to the previous configured unit page if available.
Esc key: this key is used to go back to the system status screen.
Reset key: this key is used to reset the working hours and number of starts of the single unit.
Alarm key: this button open the alarms and notify page.
Next key: this key is used to go to the next configured unit page if available.
5.1.8
UNIT PROBE STATUS SCREEN – FROM SYSTEM STATUS SCREEN
This screen is accessible selecting the entry “Unit probe status” in the service menu.
