Emerson Daniel Series User Manual Download Page 62

Page: 62 / 106

4.3.2

Piping recommendations

Figure 4-3: Typical installation for a Series 1500 LTM

•

Note the direction of flow indicated on the plate near the inlet flange and install
accordingly.

•

New installations: Flush lines thoroughly to rid piping of potentially damaging foreign
material such as welding bead, pipe scale, etc. before the turbine meter is placed into
service.

Important

A spool piece installed in place of the turbine meter is recommended for this procedure.

NOTICE

Comply with local government regulations and company requirements.

Important

Ensure that piping or other attachments connected to the turbine meter are not under
stress.

Important

Provide fire prevention measures and equipment per local regulations.

Prepare the turbine meter for use

User manual

March 2019

P/N 3-9008-515

Daniel Series 1500 Liquid Turbine Meter, NPS 3-24

Summary of Contents for Daniel Series











































































































Search results

Summary of Contents for Daniel Series

Reviews:

Related manuals for Daniel Series

Brands by name

Popular brands

Emerson Daniel Series, User Manual

Search results

Summary of Contents for Daniel Series

Reviews:

Related manuals for Daniel Series

Brands by name

Popular brands