84
Section 17: Technical Data and Certifications
Technical Data and Certifications
User Instructions
MAN-02-04-60-0351-EN Rev. 3
Febraury 2019
TYPE
FQ-03
FQ-06
FQ-10
FQ-20
FQ-30
FQ-50
Max Electric Torque
max. lbs. ft (Nm)
220 (300)
440 (600)
738 (1000) 1475 (2000) 2210 (3000) 3687 (5000)
End of Spring Remaining Fail-Safe Torque
max. lbs. ft (Nm)
110 (150)
220 (300)
369 (500)
730 (1000) 1100 (1500) 1800 (2500)
Modulating Torque Rating
max. lbs. ft (Nm)
110 (150)
220 (300)
369 (500)
730 (1000) 1100 (1500) 1800 (2500)
Fail-Safe Spring Return Direction
Selectable (CW or CCW) spring return
Fail-Safe Trigger
Loss of 24 V DC fail-safe command signal or main power supply (selectable)
Electric Stroke Time Range (Field Adjustable)
sec
14 - 420
14 - 420
20 - 500
30 - 850
38 - 1050
60 - 1600
Fail-Safe Spring Rate / Field Adjustable
sec
1 - 5
1 - 5
1 - 5
3 - 10
3 - 10
6 - 15
Available Travel
90 +/– 5° with mechanical end-stop
Operation Mode
On/Off Duty
S2
Modulating Duty
S9
Manual Override
Optional
VALVE-MOUNTING
Mounting Base
ISO 5210
F07/F10
F10/F12
F12/F14
F14/F16
F14/F16
F16/F25
Max Stem Diameter
inch (mm)
1 (25.4)
1.57 (40)
1.92 (49)
2.36 (60)
2.36 (60)
2.95 (75)
Max Square (Flats)
inch (mm)
0.86 (22)
1.25 (32)
1.61 (41)
1.88 (48)
1.88 (48)
(55)
OPERATING CONDITIONS
Ingress Protection
IP66 (NEMA 4x) , IP67 (NEMA 6), IP68
Ambient Temperature
- 40° C (-40°F) to +60°C (140°F)
HOUSING
Material
Aluminum
Enclosure
Weather-proof / Explosion-proof (optional)
Certification
1ph, 24VD – CSA NEC 500 /
NEC505, ATEX, IECEx, LVD
3ph - ATEX
1ph, 24VD – CSA NEC 505, ATEX
Coating
High quality two component polyurethane paint system-C3 ISO12944-5
Weight Approx.
lb. (kg)
77 (35)
117 (53)
229 (104)
311 (141)
450 (204)
754 (342)
MOTOR - BRUSHLESS TECHNOLOGY
Isolation Class
Insulation class F, max. 155° C (311°F) permanent temperature
Power Supply
V
24 - 230 VDC / 115 - 230 VAC Single Phase / 380 - 480 VAC Three Phase
24 VDC (option not available with FQ-10, FQ-30, FQ-50)
Current Consumption
A
2.5
Power Comsumption idle with fail-safe brake energized
W
40
ACTUATOR CONTROL
Technology
Integrated processor control unit with frequency technology for variable speed control
Control Unit
Control Elements
· Pad-lockable selector switch LOCAL - OFF- REMOTE contact less sensor technology
· Control switch OPEN - STOP - CLOSE contact less sensor technology
· Language independent symbols
Control Functions
· Full stroke test
· Partial stroke test
Local Display
Backlit LCD display, can be rotated in 90 degree increments
LEDs
4 programmable red, green, blue LEDs for operation - readiness - warning - and error messages
Communication
Infrared communication interface and Bluetooth technology including Android App for simple configuration
Control
Inputs
5 configurable binary (discrete) control inputs
OPEN - STOP - CLOSE - EMERGENCY OPEN - EMERGENCY CLOSE
· Nominal voltage 24VDC
Status
Outputs
· 8 configurable binary (relay) outputs:
READY - OPEN - CLOSE - RUNNING OPEN - RUNNING CLOSE - TORQUE - LOCAL - REMOTE
· Power supply 24 VDC +/– 6V (selectable internal or external)
Voltage Input and Output
Power Supply - External
· Input power range: 20-30VDC max current consumption 320mA or 100mA in current save mode
· Status indication also in case of a main power supply failure
Power Supply - By Actuator
· Output voltage: typical 22V max output current 150mA
· Reference ground is the common ground of the control unit and of the analog inputs and outputs
FUNCTIONS
Standard
· Switch-off mode adjustable, travel or torque dependent
· Torque adjustable: 25-100% of max torque
· Adjustable speed for process optimization and emergency speeds.
· Password protection (reading and/or writing)
· Multilingual display
· Status indication for binary inputs/outputs and analog signals on LCD display
· Data logging for analysis and service
· Motor protection by positive temperature coefficient sensors
ELECTRICAL CONNECTION
Cable Entry
3 metric threaded boreholes for cable grands: Weather-proof 1xM40, 1xM32, 1xM25 /
Explosion-proof 1xM40 + 2xM20
OPTIONS
Digital Communication
Modbus RTU, ProfiBus, ProfiNet, Foundation FieldBus HART Platforms
Relay Board
250 VAC, 2A with 4 outputs
Analog Position Transmitter
0/4-20mA (2-wire)
Coating
4 layer with Epoxy under coat for increased corrosion protection – C5-I, C5-M ISO12944-5
