32
Section 7: Control Unit
User Instructions
MAN-02-04-60-0351-EN Rev. 3
Febraury 2019
Control Unit
Use the control switch towards to the characters to change the parameter or
(see Figure 33 to Figure 36). After reaching the desired parameter value, confirm the value
with the selector switch again, flip it slightly towards , (see Figure 24 to Figure 28).
7.3.3 Configuration Example
By way of example, we will change parameter P20.6 (wireless) from 0 (wireless off) to 2
(Bluetooth communication on). Thus, the Bluetooth connection is activated for a short
time and then deactivated again automatically.
Step 1 - The operating and control switch must be in the neutral position.
Figure 42
Selector/Control Switch (2)
1
2
Parts Overview:
1.
Selector Switch (red)
2.
Control Switch (black)
Step 2 - Now, move the control switch down towards until the menu item P20.6
Miscellaneous Wireless is displayed.
Figure 43
Control Switch Flipped Down
