Emerson AXP 1410, Installation And Use Manual

Page: 182 / 204

AXP 1410 Installation and Use (6806800H70F)
Safety Notes
182
Personal Injury
Cables that are not installed securely can cause injuries due to entanglement or tripping.
To avoid injury make sure cables are securely installed. Never change the system’s cabling as
delivered by Emerson. The cabling should follow existing cable paths using existing or similar
cable fastenings. Check proper function of the system after cabling extensions.
System Malfunction or Damage
Accidental removal of the power cable while the system is operating might impact system
operation or cause damage.
To avoid an accidental removal of the power cable during system operation make sure that the
power cable is properly fixed to the chassis or the rack.
Personal Injury
To avoid electric shock make sure that contacts and cables of the system cannot be touched
while the system is operating.
If in doubt concerning cabling, ask your local Emerson representative.
Expansion and FRU Exchange
System Overload
To avoid system overload check the total power consumption of all components installed.
Make sure that any individual output current of any component stays within its acceptable
limits. See the technical specification of the respective component.
Loss of Safety and EMC Compliance
By using additional plug-in products it may be possible that the system is no longer compliant
to safety and EMC regulations. The system integrator must make sure that the compliancy is
guaranteed.
System Damage Tempe
To avoid system damage the fan replacement must be done within the 1-minute
recommended service interval.
Make sure the replacement FTM is available and ready to install.