Emerson AXIMA 2000, Installation Manual

Page: 17 / 86

8
AXIMA 2000/4000 Installation Manual
Selecting an Enclosure
The AXIMA 2000/4000 multi-axis controller is designed for most
industrial environments. However, no sophisticated electronic
system can tolerate atmospheric contaminants such as moisture,
oils, conductive dust, chemical contaminants and metallic particles.
If the AXIMA 2000/4000 is going to be subject to this type of
environment, it must be mounted in a metal enclosure with a
minimum rating of NEMA 12.
System Grounding Requirements
AXIMA 2000/4000 Grounding
The GND terminal of the AXIMA 2000/4000 is internally bonded to
the chassis. The enclosure GND and the AXIMA 2000/4000 GND
should be a common signal point that ultimately is a continuous path
to earth ground. These ground wires of the AXIMA 2000/4000 should
not be shared with other equipment in the enclosure.
Figure 4 AXIMA 2000/4000 Grounding Point
The temperature inside the enclosure should not exceed 45° C (113° F).
WARNING
!
COM GND L2 L1
L2
L1
EARTH GROUND
LOGIC COMMON
96 TO 264 VOLTS AC
@ 50 TO 60 Hz
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com