Emerson AXIMA 2000, Installation Manual

Page: 14 / 86

5
Hardware Installation
The following installation requirements, methods and procedures are
provided to assure reliable, trouble free installation and operation of
your AXIMA 2000/4000 controller. The methods and procedures
outlined on the following pages include safety considerations,
mounting, grounding, and power requirements.
Safety Considerations
This multi-axis controller product is intended for professional
incorporation into a complete system. If installed incorrectly it may
present a safety hazard. The product uses high voltages and is used
to control mechanical equipment which can cause injury. Close
attention is required to the electrical installation and the system
design to avoid hazards either in normal operation or in the event of
equipment malfunction. System design, installation, commissioning
and maintenance must be carried out by personnel who have the
necessary training and experience. They must read this safety
information and the instruction manual carefully.
It is your responsibility to comply with the safety requirements of
your system. This includes installing the system with an appropriate
master interlock switch for emergency shutdown that will remove AC
power from the system any time the equipment is not running or the
emergency stop is activated. This reduces the possibility of
electrocution or unwanted motion.
Enclosure
The controller is intended to be mounted in an enclosure which
prevents access except by trained and authorized personnel, and
which prevents the ingress of contamination.
P/N 400290-00
AXIMA 2000/4000 In-
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com