EMBRON Hatteland Technology 1 G2 Series, User Manual

Page: 27 / 128

Physical Connections
27
IND100133-81
2 x RS-422 / RS-485 COM I/O:
The COM (non-isolated RS-422/485) allows functionality to communicate with serial based equipment including
controlling internal buzzer externally. Connect and fasten your cables from your compatible external equipment to the
5-pin Terminal Block 3.81 connector. Please review the “Pinout Assignments” chapter as well as “Housing / Terminal
Block Connector Overview” in this manual for more information.
Hatteland Technology’s Serial Remote Control Interface (SCOM) protocol document can be downloaded from:
https://www.hattelandtechnology.com/hubfs/pdfget/inb100018-6.htm
1 x USER (POTENTIOMETER INPUT / OUTPUT support):
Allows for controlling Brightness of the displayed image on screen by connecting an external remote control to the
D-SUB 9P connector (male) which has Potentiometer IN, +5VDC OUT and BRT +/- IN functionality built in. Review the
“Pin Assignments” chapter in this manual for more information on how to activate this functionality.
Cable Tension
To reduce tension on the cables you connect, secure them with a cable
tie to the chassis hinges as illustrated.
Connector Marking:
All Maritime Multi Display Series 1 - Generation 2 (G2) units has clear silk printed symbols and text illustrating the
connector function and type. Factory options are marked with dashed border on slik print.
Example of Connection area silk print and location (19 inch illustrated below)