
Physical Connections
28
IND100133-81
1 x RS-232 COM I/O:
This D-SUB 9P connector (female) provides additional functionality for the unit. The Serial Remote Control features a
RS-232 (non-isolated) interface for controlling internal parameters like brightness. You can access most of the
parameters available in the OSD menu and with special commands control the unit externally. This COM can also be
used to upgrade the firmware for the graphic controller inside the unit which is available on request and through
service channels (for qualified personnell only).
Fasten your external cable to the D-SUB 9P connector (female) using
the provided screws on the cable housing.
Please review “Management Settings/Communication” in the “OSD Menu Functions” chapter for more information.
Hatteland Technology’s Serial Remote Control Interface (SCOM) protocol document can be downloaded from:
https://www.hattelandtechnology.com/hubfs/pdfget/inb100018-6.htm
1 x Network/LAN INPUT / OUTPUT (NET A):
Supports 10/100/1000Mbps Ethernet (LAN). Suitable for twisted pair cables CAT.5E. Make sure the network cable
connector ”clicks” into the RJ-45 connector. This connector will allow remote control via SCOM of the display unit to
control common functions like brightness, input source and more.
Hatteland Technology’s Serial Remote Control Interface (SCOM) protocol document can be downloaded from:
https://www.hattelandtechnology.com/hubfs/pdfget/inb100018-6.htm
1 x USB SCOM:
Connect a TYPE A USB Cable between this connector and your PC. Port is USB2.0 (<5m). This connector will allow
remote control via SCOM of the display unit to control common functions like brightness, input source and more.
Hatteland Technology’s Serial Remote Control Interface (SCOM) protocol document can be downloaded from:
https://www.hattelandtechnology.com/hubfs/pdfget/inb100018-6.htm
3 x COMPOSITE IN/VIDEO IN:
Connect your BNC cable connector (male) to the BNC Connectors (female) on the unit. This will allow 3 video signals
from i.e. cameras & dvd players to be visible on screen either as full screen video or Picture-In-Picture/Picture-By-Pic-
ture. To activate any of these functionalities, the unit must be configured via the OSD menus (see own chapter). PAL /
NTSC / SECAM VIDEO signal formats supported.
1 x DisplayPort (DP) IN:
Connect your DP (male) cable to the DisplayPort (v1.2) 20P connector (female) of the unit. The DP has its own locking
mechanism that locks the plug inserted. Make sure the plug “clicks” into place to verify a proper and secure
connection.
Summary of Contents for Hatteland Technology 1 G2 Series
