EMBRON Hatteland Technology 1 G2 Series, User Manual

Page: 23 / 128

23
IND100078-26
General Installation Recommendations
Installation
Rotary Bracket and Mounting Bracket (15 inch) combined assembling
Illustration shows “Mounting Bracket JH 15TBR STD-A1” and “Rotary Bracket JH 15TRO STD-A1” combined. The brackets are available separately
and are delivered in parts. Some disassembly/assembly is required. Use the provided screws/bolts/nuts included in the package. A stand-alone
“Rotary Bracket” can not be mounted to a Display or Panel Computer unit without the “Mounting Bracket” as base first. For alternative drawings/
measurements of the brackets, review sales drawing (available on internet or inside user manual).
You must provide your own bolts to secure the completed unit (FIG 3) to the mounting location. Recommended size to mount complete unit is:
M10 and minimum 30mm in length. If no Rotary Bracket is present or needed, the Mounting Bracket should be mounted at location with M6 >20mm
in length depending on material of table/desktop etc.
A#
4 pcs
4 pcs
Mounting
Bracket
Rotary
Bracket
1
B#
4 pcs
2
A#
4 pcs: Dome Nut M6, ISO7043, Black + Screw M6x12mm Din933 Black 145 060x012 ZBA
B#
4 pcs: M6 x 1 x 12mm Cross Head Screw (to mount bracket to product)
3
1
2
Securing Mounting Bracket without Rotary Bracket
Note that the length of bolts should not exceed 12mm (ref: #2 in table above). Using any longer is not possible due to
mechanical design inside which are designed to protect the electronics. Review also technical drawings chapter
in the user manual for measurements and dimensions of brackets.
# 1: Mount bolts on each side. Make adjustments before securing the bolts.
# 2: Adjust the tilting angle and secure the bolts.