
114
IND100241-43
Appendix
Pinout Assignments
Connectors illustrated here are either standard by factory default or may be available (through factory customization).
Note that some combinations may not be possible due to space restrictions. List also valid for customized models. All
pin out assignments are seen from users Point of View (POV) while looking straight at the connector. Please review
the dedicated datasheet or technical drawings for your actual unit to identify and determine the presence of desired
connector. Detailed information about Housing Connectors (terminal blocks) can be found earlier in this manual.
18/24/24+5 pin DVI-D, DVI-I, Single Link, Dual Link Combined Female
1 2 3 4 5 6 7 8 C1 C2
9 10 11 12 13 14 15 16 C5
17 18 19 20 21 22 23 24 C3 C4
PIN 01 T.M.D.S. Data2 - (Digital - RED link 1)
PIN 02 T.M.D.S. Data2 + (D RED link 1)
PIN 03 T.M.D.S. Data2/4 Shield
PIN 04 T.M.D.S. Data4 - (Digital - GREEN link 2)
PIN 05 T.M.D.S. Data4 + (D GREEN link 2)
PIN 06 DDC Clock
PIN 07 DDC Data
PIN 08 Analog Vertical Sync (DVI-I only)
PIN 09 T.M.D.S. Data1 - (Digital - GREEN link 1)
PIN 10 T.M.D.S. Data1 + (D GREEN link 1)
PIN 11 T.M.D.S. Data1/3 Shield
PIN 12 T.M.D.S. Data3 - (Digital - BLUE link 2)
PIN 13 T.M.D.S. Data3 + (D BLUE link 2)
PIN 14 +5V Power (for standby mode)
PIN 15 Ground (for +5V and analog sync)
PIN 16 Hot Plug Detect
PIN 17 T.M.D.S. Data0 - (Digital - BLUE link 1) and digital sync.
PIN 18 T.M.D.S. Data0 + (D BLUE link 1) and digital sync.
PIN 19 T.M.D.S. Data0/5 Shield
PIN 20 T.M.D.S. Data5 - (Digital - RED link 2)
PIN 21 T.M.D.S. Data5 + (Digital - RED link 2)
PIN 22 T.M.D.S. Clock Shield
PIN 23 T.M.D.S. Clock + (Digital clock + (Links 1 and 2)
PIN 24 T.M.D.S. Clock - (Digital clock - (Links 1 and 2)
PIN C1 Analog RED
PIN C2 Analog GREEN
PIN C3 Analog BLUE
PIN C4 Analog Horizontal Sync.
PIN C5 Analog Ground (return for RGB signals)
DDC = Display Data Channel.
T.M.D.S = Transition Minimized Diff erential Signal
PIN C1,C2,C3,C4 = Only present on DVI-I connectors.
NOTE: Connector shows a DUAL LINK design, but some units may not support it.
Only units with 1920x1200 or more in resolution require / support DUAL LINK.
Analog RGB/VGA, 15-pin DSUB High Density Female
Onboard or via DVI-4 adapter
5 4 3 2 1
15 14 13 12 11
10 9 8 7 6
PIN 01 RED
Red, analog
PIN 02 GREEN
Green, analog
PIN 03 BLUE
Blue, analog
PIN 04 ID2/RES
Reserved for monitor ID bit 2 (grounded)
PIN 05 GND
Digital ground
PIN 06 RED_RTN
Analog ground red
PIN 07 GREEN_RTN Analog ground green
PIN 08 BLUE_RTN
Analog ground blue
PIN 09 KEY/PWR
+5V power supply for DDC (optional)
PIN 10 GND
Digital ground
PIN 11 ID0/RES
Reserved for monitor ID bit 0 (grounded)
PIN 12 ID1/SDA
DDC serial data
PIN 13 HSYNC.
Horizontal sync or composite sync, input
PIN 14 VSYNC.
Vertical sync, input
PIN 15 ID3/SCL
DDC serial clock
8-pin RJ45 10/100/1000Mbps LAN/Ethernet
1 2 3 4 5 6 7 8
PIN 01 D0P+
Diff erential Pair 0 (Positive)
PIN 02 D0N-
Diff erential Pair 0 (Negative)
PIN 03 D1P+
Diff erential Pair 1 (Positive)
PIN 04 D2P+
Diff erential Pair 2 (Positive)
PIN 05 D2N-
Diff erential Pair 2 (Negative)
PIN 06 D1N-
Diff erential Pair 1 (Negative)
PIN 07 D3P+
Diff erential Pair 3 (Positive)
PIN 08 D3N-
Diff erential Pair 3 (Negative)
20-pin DisplayPort (DP) Female
20 18 16 14 12 10 8 6 4 2
19 17 15 13 11 9 7 5 3 1
PIN 01
ML_Lane 0 (p) - Lane 0 (positive)
PIN 02
GND - Ground
PIN 03
ML_Lane 0 (n) - Lane 0 (negative)
PIN 04
ML_Lane 1 (p) - Lane 1 (positive)
PIN 05
GND - Ground
PIN 06
ML_Lane 1 (n) - Lane 1 (negative)
PIN 07
ML_Lane 2 (p) - Lane 2 (positive)
PIN 08
GND - Ground
PIN 09
ML_Lane 2 (n) - Lane 2 (negative)
PIN 10
ML_Lane 3 (p) - Lane 3 (positive)
PIN 11
GND - Ground
PIN 12
ML_Lane 3 (n) - Lane 3 (negative)
PIN 13* CONFIG1 - connected to Ground*
PIN 14* CONFIG2 - connected to Ground*
PIN 15
AUX CH (p) - Auxiliary Channel (positive)
PIN 16
GND - Ground
PIN 17
AUX CH (n) - Auxiliary Channel (negative)
PIN 18
Hot Plug - Hot Plug Detect
PIN 19
Return - Return for Power
PIN 20
DP_PWR - Power for connector (3.3 V 500 mA)
*Pins 13 and 14 may either be directly connected to ground or
connected to ground through a pulldown device. This is the pinout for
source-side connector, the sink-side connector pinout will have lanes
0–3 reversed in order; i.e., lane 3 will be on pin 1(n) and 3(p) while
lane 0 will be on pin 10(n) and 12(p).
Summary of Contents for Hatteland Technology 1 G2 Series
