EMBRON Hatteland Technology 1 G2 Series, User Manual

Page: 11 / 128

11
IND100077-247
Product Labeling
Introduction
This section details the locations, content details and specifications for factory mounted labels for all currently
available standard Hatteland Technology Maritime Multi Display (MMD) - Series 1 Generation 2 models. This
information will in most cases also apply for most Customized Models as well, but may differ based on customer
requirements, in that case, please refer to the customized User Manual (paper or electronic version, dependent on
customer requirements).
Label Size and Types
ID Label Layout Description Specification
Type : Serial Number Label
Name : Label B
Size : 60mm wide x 20mm high (rectangle size)
Note: Text content of label will match specifications
derived from Data Sheet.
Silver with glue on back, non-
tearable and made for thermal
transfer printing.
Barcode type: CODE128 (used extensively world wide in shipping and packaging
industries. The symbology was formerly defined as ISO/IEC 15417:2007.)
Type : Touch Screen Label
Name : Label B
Size : 60mm wide x 20mm high (rectangle size)
Note: Only present if Touch Screen was part of factory
option order.
Silver with glue on back, non-
tearable and made for thermal
transfer printing.
Note: Content on label will vary based on Touch Screen type and/or Touch Screen
Controller. Label shown is for illustration purposes only!
Type : Warranty Label
Size : 30mm wide x 23mm high (oval size)
Tamper-proof sticker with glue on
back.
Type : Quality Control (QC) Label
Size : 30mm wide x 23mm high (oval size)
FLEXcon®PHARMcal®V 400 F
WhiteTC-848V-23 TRACrite™150
Type : Handling Symbols Label
Size : 16mm wide x 8mm high (rectangle size)
Symbols indicate Cadmium Free product and proper
waste handling required.
FLEXcon®PHARMcal®V 400 F
WhiteTC-848V-23 TRACrite™150
Type : Shock Hazard Caution Label
Name : Label B
Size : 60mm wide x 20mm high (rectangle size)
Silver with glue on back, non-
tearable and made for thermal
transfer printing.
Rules specified in IEC62368-1:2018 chapter 5.7.6. Applies for units with Dual/Multi-Power
inputs only (more than 1 Power Input).
Label Locations
Number ID and coloring based on “Label Size and Types“ table from previous page. All illustrations below are seen
Please note that typenumber shown above is a generic sample only. May not reflect products mentioned in this
manual. Please review actual product S/N label.