EMBRON Hatteland Technology 1 G2 Series, User Manual

Page: 67 / 128

67 User Controls
OSD Menu Functions
IND100064-72
Service Settings
Will show various technical and unit related information, such as; Firmware versions, Elapsed Time,
Internal Temperature, Fault Status and activation for the internal Test Pattern image useful for trouble-
shooting. Some of these functions are static information while others are accessible. Whenever you are
in contact with helpdesk or service, they might require you to read back some of these values in order to
precisely pinpoint any problem/question you should have with the unit or its functionality.
Information blocks as follows:
"Video Scaler Firmware" = Displays the firmware version of the internal videocontroller.
Example: "FW200001-0BV2"
"uC Firmware" = Displays the firmware version of the touch enabled buttons.
Example: "FW100002-0A12"
"Elapsed Time" = Shows the time elapsed in hours since first-time power on.
Example: "180"
"Current Temp" = Shows the internal temperature measured by onchip sensor.
Example: "+027.0 C", in Celcius Degrees.
"Fault Status" = Will show detected Fault Status by measuring various
internal values. Status is stated as either "OK" or "FAULT"
Note: This item is only visible in "Advanced" menu mode.
|---2---
Service - Fault Status *Available in "Service" mode only
Will show detected Fault Staus by measuring various internal values during operation. Status is
stated as either “OK” or “FAULT”. The contents of this submenu is listed below.
Fault Status as follows:
“NVRAM” = Status for Non-volatile random-access memory,
used to store parameters and settings.
“Ethernet” = Status for Ethernet/LAN communication chip controller.
“GDC” = Status for Glass Display Control™ (GDC) touch button controller.
“TMP Sensor” = Status for internal temperature measured by on-chip sensor.
“Video Scaler” = Status for on-board Digital Visual Interface graphics chip processor.